top of page
Search

Shade Net in 2026: The Four Questions Buyers Ask Before the Price

Nov 2
3 min read

By 2026 a shade net quotation is no longer a price per square metre. Buyers in Europe and North America now open with four questions before they ask the number, and a supplier who cannot answer them gets dropped before the price is even discussed. This is what those questions are, and what a mill can actually answer.


1. How much recycled content, and can you prove it?


Recycled HDPE is the first question, not the last. It is driven less by the customer's own conscience than by their own reporting obligations. Large retailers now pass supply-chain data requests down to fabric suppliers, and a netting order sits in that chain.


What a buyer can realistically ask for:


Post-industrial recycled content (PIR): off-spec yarn and selvedge trim reground inside the mill. This is the easiest to guarantee and to trace, because it never leaves the factory.


Post-consumer recycled content (PCR): harder, and it changes the yarn. PCR HDPE usually needs a virgin blend to hold tensile strength, and the colour will drift between batches.


A mill that claims recycled content should be able to state the percentage, the source, and whether the percentage is by weight of the finished roll or of the polymer input. Those two numbers are not the same, and the difference is often ten points.


Practical note: at 30 percent PIR, a knitted shade net holds its specified gram weight and UV performance. Above roughly 50 percent PCR, expect to move up one gram weight band to keep the same tensile target, which changes the price more than the recycled polymer saves.


2. Is the finishing PFAS-free, and what replaced it?


Water repellency and soil resistance on shade fabric used to come from fluorinated chemistry. Restrictions on PFAS have pushed most mills to alternatives, and a 2026 buyer will ask which one.


What to say plainly: whether the fabric is untreated, or treated with a non-fluorinated repellent, and whether the treatment affects the shade rate. A repellent coating fills part of the aperture. On a 70 percent net that can push the real shade rate two to three points higher, which matters if the customer specified a number.


If the net is untreated, which most agricultural shade net is, say so directly. Untreated is the cleanest answer, and it lets the buyer skip the chemistry question entirely.


3. What happens to the net at 40 degrees?


Heat is the 2026 specification driver. Buyers who used to order one shade rate for a whole country now order different rates for different sites, because two consecutive summers of record heat changed the crop response.


The mechanism: shade rate reduces total radiation, but it also reduces the airflow-driven cooling across the canopy. A 90 percent net on a poorly ventilated house can leave the crop hotter than a 70 percent net on a ventilated one. This is why a supplier who only quotes shade percentage is not answering the question.


What we ask for at quotation: site design wind speed, whether the structure is open-sided or enclosed, and the crop. From those three we recommend a construction and gram weight, not only a percentage.


4. What is on the roll label and in the documents?


The least glamorous question and the one that stops shipments. A 2026 order typically needs: roll label with batch number and gram weight, a declaration of the shade rate tolerance, a UV test reference, and the recycled content statement. Some buyers also ask for a declaration on restricted substances.


If any of those documents has to be produced after the order is placed, the delivery date moves. Sending them with the quotation is faster than being asked for them at the port.


Frequently asked questions


Does recycled content weaken a shade net?


Not at moderate levels. Post-industrial regrind inside a mill is the same polymer and holds its tensile target at 30 percent. Post-consumer content is more variable and usually needs a virgin blend, so the gram weight is raised to compensate.


Can you supply a shade net that is both high shade and high airflow?


Not at the same moment. Tape construction at 130 g/m2 gives the best heat blocking per square metre, but airflow falls as shade rises. On an enclosed house the answer is usually extra vent area rather than a lower shade rate.


What lead time should I plan for in 2026?


Standard gram weights in black and green ship in 7 to 15 days from a stock position; custom gram weight, colour or printed roll labels take 20 to 30 days. Documentation requested after the order is placed adds to both.


Tell us the crop and the site, we will quote a construction


Send us the site, the crop and the shade rate you are targeting. You get a recommended construction, gram weight and delivered price, plus the label and tolerance documents with the quotation.

 
 
 

Recent Posts

See All

Comments


bottom of page